Shop
Showing 61–75 of 528 results
-
Modules/Motors
A3144Eua
FEATURES and BENEFITS
- Superior Temp. Stability for Automotive or Industrial Applications
- 4.5 V to 24 V Operation … Needs Only An Unregulated Supply
- Open-Collector 25 mA Output … Compatible with Digital Logic
- Reverse Battery Protection
- Activate with Small, Commercially Available Permanent Magnets
- Solid-State Reliability
- Small Size
- Resistant to Physical Stress
SKU: n/a -
Arduino, Modules/Motors
AC Voltage sensor module ZMPT101B 250V Voltage transformer module Arduino
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a -
Modules/Motors
ACS712 Arduino Current Sensor
Description
The ACS712 Current Sensors offered on the internet are designed to be easily used with micro controllers like the Arduino.
These sensors are based on the Allegro ACS712ELC chip.
These current sensors are offered with full scale values of 5A, 20A and 30A.
SKU: n/a -
Analog/Digital Converters
ADC0800 Analog to Digital Converter
Features
- Low cost
- +5V, 10V input ranges
- No missing codes
- Ratiometric conversion
- TRI-STATE outputs
- Fast TC 50 ms
- Contains output latches
- TTL compatible
- Supply voltages 5V DC and b12V DC
- Resolution 8 bits
- Linearity +1 LSB
- Conversion speed 40 clock periods
- Clock range
SKU: n/a -
Analog/Digital Converters
ADC0804 Analog to Digital Converter
Features of ADC0804:
- 0V to 5V analog input voltage range with single 5V supply
- Compatible with microcontrollers, access time is 135 ns
- Easy interface to all microprocessors
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- No zero adjust required
- 0.3[Prime] standard width 20-pin DIP package
- Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span adjusted voltage reference
- Differential analog voltage inputs
SKU: n/a -
Analog/Digital Converters
ADC0808 Analog to Digital Converter
Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Key Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog/Digital Converters
ADC0809 Analog to Digital Converter
Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Key Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog/Digital Converters
ADC0831 Analog to Digital Converter
Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Key Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog/Digital Converters
ADC0832 Analog to Digital Converter
Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Analog/Digital Converters
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
ADC Bit rate: 16 Bit
Interface Type: I2C
Channels: 4 Channels AN0 AN1 AN2 AN3 or 2 differential inputs
Input voltage: 2.0~5.5V
Channel input voltage :0-VDD
Continuous Mode: Only 150uA
Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE:8sps-860sps
Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,-2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V
I2C 7-bit addresses between 0x48-0x4B
Size:18mm*28mm
Applications
Portable instrumentation
Consumer goods
Battery monitoring
Temperature measurement
Factory automation and process controlsSKU: n/a