ADC0804 Analog to Digital Converter
Out of stock
Features of ADC0804:
- 0V to 5V analog input voltage range with single 5V supply
- Compatible with microcontrollers, access time is 135 ns
- Easy interface to all microprocessors
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- No zero adjust required
- 0.3[Prime] standard width 20-pin DIP package
- Operates ratio metrically or with 5 VDC, 2.5 VDC, or analog span adjusted voltage reference
- Differential analog voltage inputs
₨1,270
Out of stock
CompareProduct Description
We already know that analog-to-digital (ADCs) converters are the most widely used devices for information securing to translate the analog signals to digital numbers so microcontroller can read them easily. There are many ADC converters like ADC0801, ADC0802, ADC0803, ADC0804 and ADC080. In this article we are going to discuss about the ADC0804 converter.
ADC0804 is a very commonly used 8-bit analog to digital converter. It works with 0V to 5V analog input voltage. It has single analog input and 8-digital outputs. Conversion time is another major factor in judging an ADC, in ADC0804 conversion time varies depending on the clocking signals applied to CLK R and CLK IN pins, but it cannot be faster than 110 μs.
Based on 0 reviews
Be the first to review “ADC0804 Analog to Digital Converter”
You must be logged in to post a review.
Related products
-
Analog/Digital Converters
ADC0831 Analog to Digital Converter
Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Key Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog/Digital Converters
DAC0832 Digital to Analog Converter
Features
- Double-Buffered, Single-Buffered or Flow-Through Digital Data Inputs
- Easy Interchange and Pin-Compatible with 12-bit DAC1230 Series
- Direct Interface to All Popular Microprocessors
- Linearity Specified with Zero and Full Scale Adjust Only—NOT BEST STRAIGHT LINE FIT.
- Works with ±10V Reference-Full 4-Quadrant Multiplication
- Can Be Used in the Voltage Switching Mode
- Logic Inputs Which Meet TTL Voltage Level Specs (1.4V Logic Threshold)
- Operates “STAND ALONE” (without μP) if Desired
- Available in 20-Pin SOIC or PLCC Package
SKU: n/a -
Analog/Digital Converters
MINI DC TO DC Buck Converter 3A MP1584EN
- Wide 4.5V to 28V Operating Input Range
- Programmable Switching Frequency from 100kHz to 1.5MHz
- High-Efficiency Pulse Skipping Mode for Light Load
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing ResistorMINI DC TO DC Buck Converter 3A MP1584EN
SKU: n/a -
Analog/Digital Converters, Tools & Kits
USB Detector Current Voltage 3V-9V Tester Double USB Row Shows
Analog/Digital Converters, Tools & KitsUSB Detector Current Voltage 3V-9V Tester Double USB Row Shows
USB Current Voltage Tester
Condition: New
Measuring range: DC 3v – 9v, current: 0-3a (error: ± 1%), 5a biggest support
5a current (if more than 3a, error will be larger than 3%)
Color is shown as picturesSKU: n/a
There are no reviews yet.