Special Offer
-
Raspberry Pi
Raspberry Pi Camera with Flash
Specifications:
Feature Details Resolution 5MP (or as per availability) Flash Integrated LED flash Compatibility Raspberry Pi 3, 4, and later Video Support 1080p @ 30fps, 720p @ 60fps Connectivity Ribbon cable (included) Power Supply Directly from Raspberry Pi board Applications Surveillance, Robotics, Photography Projects SKU: n/a -
Sensor
STC3028 Digital Temperature & Humidity Controller Best Price in Pakistan
Technical Specifications
Feature Details Model STC3028 Temperature Range -20°C to 120°C Humidity Range 0% to 100% RH Power Supply AC 110V – 230V Sensor Type Digital sensor included Output Type Relay output for load control Display Type LED dual display for T & H SKU: n/a
-
Analog to Digital Converters
MCP602 IC Price in Pakistan
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP602 uses Microchip’s advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP602 operates with a single supply voltage that can be as low as 2.7V, while drawing less than 325 of quiescent current per amplifier. The MCP602 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
SKU: n/a -
Micro Controllers
PIC18F4520-I/P 8-BIT PIC Microcontroller Price in Pakistan
In terms of connectivity, the PIC18F4520 supports various communication protocols, making it suitable for interfacing with other devices and systems. Its robust set of I/O pins provides flexibility for connecting to sensors, displays, and other components. This microcontroller is commonly used in applications such as industrial control systems, home automation, robotics, and more. The PIC18F4520’s development ecosystem is well-established, with a variety of development tools, compilers, and libraries available to aid programmers. This makes it accessible to both beginners and experienced developers.
SKU: n/a
-
Analog to Digital Converters
Max 232
Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: n/a - RS-232 Bus-Terminal ESD Protection Exceeds
-
Modules and Motors
ADXL 335 Accelerometer
FEATURES
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm
- LFCSP Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
SKU: n/a -
Analog to Digital Converters
ADC0832 Analog to Digital Converter
Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required n 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible
- 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
SKU: n/a -
Analog to Digital Converters
ADC0808 Analog to Digital Converter
Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Key Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Programmer and Burners
Mk2 AVR Programmer
FEATURES
- Tested and working with AVR Studio 4, AVR Studio 5, Atmel Studio 6, Atmel Studio 7
- Tested and working with Arduino and AVRDUDE after a firmware change
- Tested and working with Windows XP, Windows 7, Windows 10, Debian Linux, Ubuntu 14.04
- Connects to PC via USB type B at 2.0 Full speed
- No need for external power supply as it takes the power supply from USB
- Uses Atmel’s 2×5 pin ICSP and 2×3 pin PDI and TPI connector layout
- Works with 5V and 3.3V targets and can supply target with power (selectable)
- Programs both flash and EEPROM
- Supports fuses and lock bit programming
- Upgradeable for future device support
- Supports target voltages from 1.8V to 5.5V
- Adjustable ISP programming speed (50Hz to 8MHz SCK frequency)
- Dimensions: (45×30) mm ~ (1.7×1.2)” + 20 cm ~ 8″ cable
SKU: n/a
Products Grid
Best Sellers
Recently Added
MCP602 IC Price in Pakistan
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP602 uses Microchip’s advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP602 operates with a single supply voltage that can be as low as 2.7V, while drawing less than 325 of quiescent current per amplifier. The MCP602 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
MAX 6675
Technical Specifications:
| Feature | Specification |
|---|---|
| Part Number | MAX6675 Thermocouple Sensor |
| Measurement Range | -200°C to 700°C |
| Interface | SPI (Serial Peripheral Interface) |
| Accuracy | ±2°C over a wide temperature range |
| Sensor Type | K-Type Thermocouple |
| Operating Voltage | 3.3V to 5V |
MAX488 IC Price in Pakistan
Key Features
MAX487 IC Price in Pakistan
Key Features
Max 485
Key Features
Max 232
Features
±15 kV Using Human-Body Model (HBM)
PIC18F4520-I/P 8-BIT PIC Microcontroller Price in Pakistan
In terms of connectivity, the PIC18F4520 supports various communication protocols, making it suitable for interfacing with other devices and systems. Its robust set of I/O pins provides flexibility for connecting to sensors, displays, and other components. This microcontroller is commonly used in applications such as industrial control systems, home automation, robotics, and more. The PIC18F4520’s development ecosystem is well-established, with a variety of development tools, compilers, and libraries available to aid programmers. This makes it accessible to both beginners and experienced developers.
PIC 16F72 Refurbished
MEMORY ORGANIZATION
There are two memory blocks in the PIC16F72 device. These are the program memory and the data memory. Each block has separate buses so that concurrent access can occur. Program memory and data memory are explained in this section. Program memory can be read internally by the user code (see Section 7.0). The data memory can further be broken down into the general purpose RAM and the Special Function Registers (SFRs). The operation of the SFRs that control the “core” are described here. The SFRs used to control the peripheral modules are described in the section discussing each individual peripheral module. Additional information on device memory may be found in the PIC™ Mid-Range Reference Manual, (DS33023).
PIC 16F628
Product Development
The PIC16F627A/628A/648A family is supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a low cost in-circuit debugger, a low cost development programmer and a full-featured programmer. A Third Party “C” compiler support tool is also available.