W1209 DC 12V Heat Cool Temp Thermostat Temperature Control Switch Sensor
The W1209 DC 12V Heat Cool Temp Thermostat Temperature Control Switch Sensor Connect to the power supply and equipment, the measuring temperature is displayed, press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease), press “SET” to confirm the setting and return, controller
automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads,
LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings, press ” + or – ” to switching between P0-P6,then long press “SET” or 10 seconds without keystrokes to confirm the setting and return. By liking Our Facebook Page Embeded Studio , you can get special discount.
Data Sheet of W1209 DC 12V Heat Cool Temp Thermostat Temperature Control Switch Sensor can be also downloaded from the link
Specifications:
- Temperature range :-50-110 ?
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution:When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
- Control accuracy: 0.1 ?
- Hysteresis accuracy: 0.1?
- Refresh rate: 0.5S
- High temperature protection: 0-110?
- Supply voltage: DC 12V
- Static current: �35MA, attract current �65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 â„?,Humidity 20% -85%
Buttons:
- P0 :Cooling / Heating; Range: C/H; Default: C
- P1 :Hysteresis Setting; Range:0.1-15; Default: 2
- P2 :Highest Setting Limit; Range:110; Default: 110
- P3: Lowest setting Limit; Range:-50; Default: -50
- P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
- P5: Delay Start Time; Range:0-10 Minute; Default: 0
- P6: Key Tone Switch; Range:0-110; Default: Off
- When the Thermostat is power off, long press “- or +”, you can restore the factory settings
There are no reviews yet.