Modules/Motors
TB6600 Stepper Motor Driver Price in Pakistan | Cheap Price at Robostan
Product Description
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis Upgraded Version of the 42/57/86 Stepper Motor segment increased to 32 segments,
Package Includes :
1 x TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step.
₨1,100 ₨1,750
TB6600 Stepper Motor Driver Price in Pakistan | Cheap Price at Robostan
TTB6600 Stepper Motor Driver Price in Pakistan | Cheap Price at Robostan. It have Input signal interface has two configurations: the user may need to use common anode connection or common cathode connection.1, common anode connection: respectively, CP +, DIR +, EN + is connected to the power supply control system, if this is the + 5V power supply can be connected directly, if this power is greater than + 5V, shall be an additional external current limiting resistor R to ensure that the internal optical coupling to drive a driving current of 8-15mA. Pulse input signal CP- access; this time, DIR-, EN- effective at low level.
2, common cathode connection: respectively CP-, DIR-, EN- connected to the control system ground terminal (SGND, isolated from power ground); + 5V pulse input signal is added by CP +; this time, DIR +, EN + in active high. Current limiting resistor R connected in the same values and common anode connection. By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of TB6600 Stepper Motor Driver Controller 4A 9~42V 32 Micro-Step CNC 1 Axis can be also downloaded from the link
TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor driver pakistan
NOTE:
EN end do not take, when EN effective rotor in the free state (offline), then the motor shaft can be rotated manually, do for your adjustment. After manual adjustment is completed, then the EN set an invalid state to continue automatic control.
Features of TB6600 Stepper Motor Driver Price in Pakistan | Cheap Price at Robostan :
This drive is an upgraded version of TB6600, heightening segments to 32 segments, for high-use segments. Applicable stepper motor: 42,57,86 type 2-phase 4-phase (4-wire line 6 line 8)
1,9V-42V DC power supply;
2, H-bridge bipolar constant phase flow drive;
3, the maximum output current of 4.0A eight optional;
4, the largest segment of the six segments 32 modes are available;
5, the input signal is high-speed optical isolation;
6, the standard common anode single-pulse interface;
7, holding off function;
8, semi-enclosed housing to accommodate more demanding environments;
9, provide energy current semi-automatic locking function;
10, built-in temperature protection and overcurrent protection.
11,201g
Terminal Definition Description:
Signal input terminal
CP +: pulse signal input positive terminal.
CP-: pulse signal input negative terminal.
DIR +: the motor reverse control of the positive terminal.
DIR-: the motor reverse control of the negative terminal.
EN +: motor off control of the positive terminal.
EN-: motor off control of the negative terminal.
Motor winding connection:
A +: A + phase motor winding connection.
A-: A- phase motor winding connection.
B +: B + phase motor winding connection.
B-: B- phase motor winding connection.
Operating voltage connection:
VCC: DC power positive (Note: 10V <VCC <42V).
GND: DC power supply negative.
Based on 0 reviews
Be the first to review “TB6600 Stepper Motor Driver Price in Pakistan | Cheap Price at Robostan”
You must be logged in to post a review.
Related products
-
Modules/Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
There are no reviews yet.