Analog/Digital Converters
RS232 To RS485 Converter
- Industrial port-powered RS232 to RS485 / RS485 to RS232 converter / adapter.
- Port-powered, no external power or RTS, DTR required.
- Industrial grade enclosed in a rugged, rustless ABS housing.
- Converts RS232 to 2-wire RS485 and vice versa.
- Supports multi-drop RS485 networks (up to 128 nodes)
- 300 to 115.2K Baud operation (auto-sensing & self-adjusting).
- Temperature range: -40ºF to 185ºF (-40ºC to 85ºC).
- Plug and play (hot-pluggable, data format auto-sensing & self-adjusting).
- Data direction auto-turnaround, no software drivers or flow control required.
- Built-in selectable 120Ω terminator for system reliability and easy installation.
- Built-in 600W surge protection, 15kV static protection and circuit protection.
- Accepts external 5VDC regulated power if the port-power is insufficient.
₨850
CompareBased on 0 reviews
Be the first to review “RS232 To RS485 Converter”
You must be logged in to post a review.
Related products
-
Analog/Digital Converters
DAC0800 Digital to Analog Converter
Features
- Fast Settling Output Current: 100 ns
- Full Scale Error: ±1 LSB
- Nonlinearity Over Temperature: ±0.1%
- Full Scale Current Drift: ±10 ppm/°C
- High Output Compliance: −10V to +18V
- Complementary Current Outputs
- Interface Directly with TTL, CMOS, PMOS and Others
- 2 Quadrant Wide Range Multiplying Capability
- Wide Power Supply Range: ±4.5V to ±18V
- Low Power Consumption: 33 mW at ±5V
- Low Cost
SKU: n/a -
Analog/Digital Converters
ADC0809 Analog to Digital Converter
Features
- Easy Interface to All Microprocessors
- Operates Ratiometrically or with 5 VDC or Analog Span Adjusted Voltage Reference
- No Zero or Full-Scale Adjust Required
- 8-Channel Multiplexer with Address Logic
- 0V to VCC Input Range
- Outputs meet TTL Voltage Level Specifications
- ADC0808 Equivalent to MM74C949
- ADC0809 Equivalent to MM74C949-1
Key Specifications
- Resolution: 8 Bits
- Total Unadjusted Error: ±½ LSB and ±1 LSB
- Single Supply: 5 VDC
- Low Power: 15 mW
- Conversion Time: 100 μs
SKU: n/a -
Analog/Digital Converters
Max 232
Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: n/a - RS-232 Bus-Terminal ESD Protection Exceeds
-
Analog/Digital Converters
DAC0831 Digital to Analog Converter
Features 
Double Buffered, Single Buffered or Flow- Through Digital Data InputsEasy Interchange and Pin-Compatible with 12-bit DAC1230 SeriesDirectly Interfaces to all Popular MicroprocessorsLinearity Specified with Zero and Full Scale AdjustWorks with ±10V Reference Full 4-Quadrant MultiplicationCan be Used in the Voltage Switching ModeLogic Inputs are TTL CompatibleSKU: n/a
Double Buffered, Single Buffered or Flow- Through Digital Data Inputs
There are no reviews yet.