Data Logging RTC SD card
The RTC Data Logger shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards and with a RTC onboard. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it, you should select the switch to the right direction.
₨300
CompareBased on 0 reviews
Be the first to review “Data Logging RTC SD card”
You must be logged in to post a review.
Related products
-
Arduino, Modules/Motors, Sensor
HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector Module for arduino
Arduino, Modules/Motors, SensorHC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector Module for arduino
Operating Voltage Range: DC4.5-20V
Static current: <60uA
Output level: High 3.3V / Low 0V
Trigger: repeatable trigger (default)
Delay time: Default 8S + -30% (can be customized range of a few tenths – tens of minutes)
PCB Dimensions: 10 * 23mm
Induction angle: <100 degree cone angle
Induction distance: 3 meters
Working temperature: -20 – +80 degrees
Sensor Lens Dimensions: Diameter: 10mm (default)
SKU: n/a -
Arduino
3’2 Inches TFT LCD Arduino
Features:
- Support Arduino Mega2560 Directly inserted
- With Full-angle IPS TFT panel
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5 V operation voltage level
- Compatible with Arduino-Series development Board.
- (Please notice:This Screen is not touch screen)
- Provided 12-examples with Arduino ,3-examples with STM32
- With SD Card Socket
- With SPI FLASH circuit
SKU: n/a -
Arduino, Modules/Motors
AC Voltage sensor module ZMPT101B 250V Voltage transformer module Arduino
- Measure within 250V AC
- Onboard micro-precision voltage transformer
- Analog output corresponding quantity can be adjusted.
- Good consistency, for voltage and power measurement
- Very efficient and accuracy
SKU: n/a -
Arduino, Modules/Motors
5A Monophase Active Output AC Current Transformer Module For Arduino
1, On-board precision micro-current transformer
2, On-board high-precision op-amp circuit, to do accurate sampling and appropriate compensation and other functions to signal
3, The module can measure AC current within 5A, corresponding output analog can be adjusted
4, Under ideal conditions, the input voltage VCC is 3-35V, according to the potentiometer (adjust the amplification ratio, amplification range 0-100 times) to adjust the required output voltage, but the output (OUT) of the maximum voltage does not exceed 1 / 2 VCC.
5, The output signal is the AC voltage signal, and the output signal voltage does not exceed the maximum 1 / 2VCC.
6, PCB board size: 38 (mm) x 18.5 (mm)SKU: n/a
There are no reviews yet.