5 inches, Hdmi, LCD, raspberry pi, tft

5 inches, Hdmi, LCD, raspberry pi, tft

5 inches Hdmi LCD Raspberry pi tft can even power the entire display from a USB port. With the default 5″ 800 x 480 display and 50 mA back-light current, the current draw is 500 mA total. You can reduce that down  370 mA by running the back-light at half-brightness (25mA). With the backlight off, the decoder and display itself draws 250 mA. If you want more back-light control, there’s a PWM input, connect that to your micro-controller or other PWM output and you can continuously dim the back light as desired. 5 inches, Hdmi, LCD, raspberry pi, tft is available in Embeded Studio

We have two versions, one is video only and one is video+touch. This version has touch screen capability. The touch screen shows up as a USB mouse so no special drivers needed. We’ve tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you’re running Linux you’re probably used to that. We also noted it does not work with a Raspberry Pi + Windows 10 IOT yet.

In particular, we suggest it for use with single board computers (or desktop/laptops!) with DVI/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 500mA on the USB port, and then feed it video via the HDMI port.

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play.

The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data – HDCP not supported! The 5″ display is 800×480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk.