Modules/Motors
Showing 16–30 of 142 results
-
Modules/Motors
Bh1750
Features
1) Illuminate to Digital Converter
2) Wide range and High resolution. ( 1 – 65535 lx )
3) Low Current by power down function
4) 50Hz / 60Hz Light noise reject-function
5) I2C bus Interface ( f / s Mode Support )
6) No need any external parts
7) It is possible to select 2 type of I2C slave-address.
8) It is possible to detect min. 0.11 lx, max. 100000 lx by using this function.SKU: n/a -
Modules/Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
-
-
Modules/Motors
Bluetooth Module HC06/HC09
The modules with the HC-04 and HC-06 firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-04 is an industrial grade product, HC-06 is a commercial grade product.
The modules with the HC-09 firmware are replacements for the HC-06 and HC-07 modules.
SKU: n/a -
-
Modules/Motors, Sensor
BMP280 Pressure Sensor Module
BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an extremely compact package. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.
SKU: n/a -
Arduino, Modules/Motors
Data Logging RTC SD card
The RTC Data Logger shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards and with a RTC onboard. Use the on-board toggle switch to select the SD card type. And when you want plug a sd card on it, you should select the switch to the right direction.
SKU: n/a -
-
Modules/Motors, Sensor
DC12V 24V PIR Sensor LED Dimmer Switch Motion Function PIR8 PIR-8 Controller for 5050 3528 5630 Flexible LED Strips Light
Modules/Motors, SensorDC12V 24V PIR Sensor LED Dimmer Switch Motion Function PIR8 PIR-8 Controller for 5050 3528 5630 Flexible LED Strips Light
1x PIR Motion Sensor LED Switch
Model: PIR-8
Input voltage: DC 12V – 24V
Output voltage: DC 12V – 24V
Max load current: 6A
Output power: 72W
Induction range: in 8 meters, 60° from center of sensor
Delay time: 1 – 10 minutes set by manual
Dimensions: 60 x 35 x 20mm
Package includes: 1x PIR Motion Sensor LED Switch, 1x English Manual.
Note: there’s NO power adapter in package, please use it with your own power adapter.SKU: n/a -
Modules/Motors
DHT11 module
TECHNICAL SPECIFICATIONS:
Power Supply: 3.3~5.5V DC
Output: 4 pin single row
Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
Accuracy: Humidity +-5%RH, Temperature +-2℃
Resolution: Humidity 1%RH, Temperature 1℃
Interchangeability: Fully Interchangeable
Long-Term Stability: <±1%RH/yearSKU: n/a