Arduino
Showing 31–41 of 41 results
-
Arduino, Modules/Motors
Joystick Arduino Joystick PS2 Breakout Module
Arduino UNO, MEGA, PRO / Due / Leonardo / Raspberry Pi 1. This is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary.2. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so.3. When pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V
SKU: n/a -
Arduino, LCDs, Modules/Motors
LCD Keypad Shield LCD1602
The arduino LCD Keypad shield is developed for Arduino compatible boards, to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.
SKU: 600 -
Arduino, Modules/Motors
Mini W5100 Ethernet Network Module Board For Arduino
You can choose a variety of interfaces: direct bus, indirect bus and SPI bus
Support for hardware TCP / IP protocol stack, support TCP, UDP, ICMP, IGMP, IPv4, ARP, PPPoE
Up to four independent ports
Internal integration 16 kbyte transceiver cache
A variety of information outputs, including the RX, TX, Full / Duplex, Collision, Link, Speed
Support auto-polarity transformation (DMI / MDIX)
3.3V power supply, IO signal compatible with 5V voltage
It comes with Ethernet port, 2 * 14 2.0mm double row
Compatible the official Arduino Ethernet librarySKU: n/a -
Arduino, Modules/Motors
MP3 Format Decoder Board Module TF Card U disk Arduino MP3 Player
l Superior sound quality.Onboard 2Wmonoamplifier(5V power of up to 3W) is directlyconnected to the speaker(recommendation 4Ω3Wspeakers),3.5mm gold plated headphone jackcan connect with headphones or external audio.l With aMicroUSB port.Through the mobile phone data line can use mobile power supply or the USB cable to charge the MP3 battery,also can use 3.7V lithiumbattery,orUSB 5V power supply.l SupportTF Card(mobile phone memory card) andU diskplay mode.l No soldering with speaker terminals for easy wiring.l The module is designed to facilitate modification.SKU: n/a -
Arduino
PCF8574 IIC I2C Serial Interface Adapter Module I2C LCD Module
Specifications and Features:
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- The backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size :41.6 x 19.2 mm.
SKU: n/a -
Arduino, Modules/Motors
Peltier 12707
Features
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts- Model: TEC1-12707
- Size: 40mm x 40mm x 4mm
- Operates from 0~15.2V DC and 0~5.5A
- Operates Temperature: -30℃ to 70℃
- Max power consumption: 66Watts
- These devices must be used in conjunction with a heat sink to avoid burn-out
- Each device is full inspected and tested
- Fitted with 6-inch insulated leads
SKU: n/a -
Arduino, Project Boards
Prototype Shield with Mini Breadboard for Arduino
Arduino Prototype Shield:
– The small soldering area
– Access to a BlueSMiRF socket for wireless communication between Arduinos
– 2 general LEDs
– 1 general pushbutton switch
– 1 Arduino reset switch brought to top level
– 5V, GND and Raw pins are exposed as well
– All Arduino pins are brought to the top level
– Mini Breadboard:
– 170 tie points
– Self-adhesive backing to stick on the Arduino Prototype Shield
– Size: 1.7″ x 1.3SKU: n/a -
Arduino, Modules/Motors, Sensor
Sensor Shield V4.0 for Arduino
– Build electronics projects just as easy as piling bricks
– Allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers etc.
– Plug & play
– Each terminal module has buckled port with VCC, GND and Output
– Buckled brick cables are like cement for bricks, make the connections easier, secure and
more professional lookingSKU: n/a -
Arduino
USB HOST SHIELD MAX3421E Keyes MODULE
The Keyes USB Host Shield allows you to connect a USB device to your Arduino board. It is based on the MAX3421E , which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. This is based on revision 2.0 of USB Host Shield. it is compatible with more Arduinos – not only UNO and Duemilanove, but also Mega and Mega 2560 work with Standard variant of this shield out of the box. No more SPI re-wiring and code modifications – just solder included stackable connectors (2×3 ICSP connector’s female side should be facing down), plug and play!
SKU: n/a -
Arduino
WROOM ESP32 Wifi Based Microcontroller Development Board Nodemcu||Robostan
Applications Of ESP32:
- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
SKU: n/a