STM Discovery Kit STM32F3 STM32F303VC With Programming Cable
Key Features
- STM32F303VCT6 microcontroller featuring 256-Kbyte Flash memory, 48-Kbyte RAM in an LQFP100 package
- On-board ST-LINK/V2 for PCB version A or B or ST-LINK/V2-B for PCB version C and newer
- USB ST-LINK functions:
- Debug port
- Virtual COM port with ST-LINK/V2-B only
- Mass storage with ST-LINK/2-B only
- Board power supply: through USB bus or from an external 3 V or 5 V supply voltage
- External application power supply: 3 V and 5 V
- L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope
- LSM303DLHC, ST MEMS system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
₨7,000 ₨9,500
STM Discovery Kit STM32F3 STM32F303VC With Programming Cable
STM Discovery Kit STM32F3 STM32F303VC With Programming Cable.STM Discovery Kit STM32F3 STM32F303VC Price in Pakistan||Robostan . The STM32F3DISCOVERY allows users to easily develop applications with the STM32F3 Series mixed-signal microcontroller based on the ArmĀ®Ā CortexĀ®-M4. Besides, it includes everything required for beginners and experienced users to get started quickly at Robostan.
In addition, based on the STM32F303VCT6, it includes an ST-LINK/V2 or ST-LINK/V2-B embedded debug tool, accelerometer, gyroscope and e-compass ST MEMS, USB connection, LEDs and push-buttons.
All features ofĀ STM Discovery Kit STM32F3 STM32F303VC Price in Pakistan ||Robostan
- STM32F303VCT6 microcontroller featuring 256āKbyte Flash memory and 48āKbyte RAM in an LQFP100 package
- USB FS
- ST MEMS motion sensor, 3-axis digital output gyroscope
- ST MEMS system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor
- Ten LEDs:
- LD1 (red) for 3.3Ā V power on
- LD2 (red/green) for USB communication
- Eight user LEDs: LD3/10 (red), LD4/9 (blue), LD5/8 (orange) and LD6/7 (green)
- 1 user and reset push-buttons
- Board connectors:
- USB FS Mini-B connector
- ST-LINK Mini-B USB connector
- Extension header for all LQFP100 I/Os for quick connection to prototype board and easy probing
- Flexible power-supply options:
- ST-LINK USB connector or USB FS connector
- External 3Ā V or 5Ā V supply voltage
- On-board debugger/programmer ST-LINK/V2 for PCB version A or B, or ST-LINK/V2-B for PCB version C and newer:
- Debug port
- Mass storage and Virtual COM port with ST-LINK/V2-B only
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, KeilĀ®, and STM32CubeIDE
Development environment
3.1 System requirements
ā¢ WindowsĀ® OS (7, 8 and 10), LinuxĀ® 64-bit or macOSĀ®(a)
ā¢ USB Type-A or USB Type-CĀ® to Mini-B cable
3.2 Development toolchains
ā¢
3.3 Demonstration software
The demonstration software, included in the STM32Cube MCU Package corresponding to
the on-board microcontroller, is preloaded in the STM32 Flash memory for easy
demonstration of the device peripherals in standalone mode. Finally, the latest versions of the
demonstration source code and associated documentation can be downloaded from
www.st.com.
Based on 0 reviews
Be the first to review “STM Discovery Kit STM32F3 STM32F303VC With Programming Cable”
You must be logged in to post a review.
Related products
-
STM Boards
STM32F4 STM32F407 DISCOVERY BOARD Price in Pakistan
Key Features
- Core: ARMĀ® 32-bit CortexĀ® -M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories
- Up to 1 Mbyte of Flash memory
- Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
- Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 1.8 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Sleep, Stop and Standby modes
- VBATsupply for RTC, 20Ć32 bit backup registers + optional 4 KB backup SRAM
- 3Ć12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2Ć12-bit D/A converters
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex-M4 Embedded Trace Macrocell™
- Up to 140 I/O ports with interrupt capability
- Up to 136 fast I/Os up to 84 MHz
- Up to 138 5 V-tolerant I/Os
- Up to 15 communication interfaces
- Up to 3 Ć IĀ²C interfaces (SMBus/PMBus)
- Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
- Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
- 2 Ć CAN interfaces (2.0B Active)
- SDIO interface
- Advanced connectivity
- USB 2.0 full-speed device/host/OTG controller with on-chip PHY
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
- 8- to 14-bit parallel camera interface up to 54 Mbytes/s
- True random number generator
- CRC calculation unit
- 96-bit unique ID
- RTC: subsecond accuracy, hardware calendar
SKU: n/a -
STM Boards
STM32F103C8T6 ARM STM32 Minimum System Development Board
Product Overview
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
Micro USB connector , you can give the board power supply and USB communication.
Size:5.3 cm x 2.2 cm.SKU: n/a -
Modules/Motors, Project Boards
Logic Analyzer EEPROM CY7C68013A-56 EZ-USB FX2LP USB2.0 Develop Board Module
Modules/Motors, Project BoardsLogic Analyzer EEPROM CY7C68013A-56 EZ-USB FX2LP USB2.0 Develop Board Module
1. Adopt cy7c68013a-56 chip: low-power version, enhanced 51 core, 16KB program data area, 48Mhz main frequency, 480Mbps high-speed transmission protocol standard, which is in conformity with USB2.0 specification and downward compatible with USB1.1.
2. Firmware EEPROM: the complete system programming scheme is used to download firmware programs directly using USB cable. The board provides 16K (24LC128) large-capacity program memory (EEPROM), which is used to store VID/PID and USB firmware, meeting the program space requirements of CY7C68013A.
3. All GPIO are introduced through 2.54mm standard needle discharge, which is greatly convenient for learners to extend the design by themselves.
4. With the corresponding firmware, the functions of the logic analyzer can be realized through the core board.
5. Provide schematic diagram in PDF format and relevant source code.SKU: n/a -
Modules/Motors
L293D motor control shield 4-Channel Stepper Motor Driver Board
Specifications:
Model Number: L293D Type Drive IC
Supply Voltage: 1.5V-6V
Dissipation Power: 1W-6W
Operating Temperature: -40C ~ 125C
Lead Free Status: Lead free / RoHS Compliant
Maximum Operating Temperature: -40C ~ 125C
Size:6.8cm x 5.5cm x 2cm – 2.68inch x 2.17inch x 0.79inch.SKU: n/a
There are no reviews yet.