Atmega16 Microcontroller Best Price in Pakistan||Robostan

Atmega16 Microcontroller Best Price in Pakistan||Robostan .This product AVR core combines a rich instruction set with 32 general purpose working registers.  All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

Features of Atmega16 Microcontroller :

The ATmega16 provides the following features:

16 Kbytes of In-System Programmable Flash Program memory with Read-While-Write capabilities

512 bytes EEPROM

1 Kbyte SRAM

32 general purpose I/O lines

32 general purpose working registers

a JTAG interface for Boundaryscan

On-chip Debugging support and programming, three flexible Timer/Counters with compare modes

Internal and External Interrupts, a serial programmable USART

a byte oriented Two-wire Serial Interface, an 8-channel

10-bit ADC with optional differential input stage with programmable gain (TQFP package only)

a programmable Watchdog Timer with Internal Oscillator

an SPI serial port, and six software selectable power saving modes.

AVR ATMega16 has the cheapest price in Pakistan.  ATML – AVR ATMega16 can download from the link given.

ATML – AVR ATMega16

The Idle mode stops the CPU while allowing the USART, Two-wire interface, A/D Converter, SRAM, Timer/Counters, SPI port, and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the Oscillator, disabling all other chip functions until the next External Interrupt or Hardware Reset. In Power-save mode, the Asynchronous Timer continues to run, allowing the user to maintain a timer base while the rest of the device is sleeping. The ADC Noise Reduction mode stops the CPU and all I/O modules except Asynchronous Timer and ADC, to minimize switching noise during ADC conversions. In Standby mode, the crystal/resonator Oscillator is running while the rest of the device is sleeping. This allows very fast start-up combined with low-power consumption. In Extended Standby mode, both the main Oscillator and the Asynchronous Timer continue to run.