Rain Drops Detection Sensor Module – LM393 Analog & Digital Rain Sensor for Arduino

Rain Drops Detection Sensor Module – LM393 Analog & Digital Rain Sensor for Arduino

Rs.150.00
Skip to product information
Rain Drops Detection Sensor Module – LM393 Analog & Digital Rain Sensor for Arduino

Rain Drops Detection Sensor Module – LM393 Analog & Digital Rain Sensor for Arduino

Rain Drops Detection Sensor Module for Arduino – LM393 Rain & Water Detection

Buy the Rain Drops Detection Sensor Module online in Pakistan from Robostan.pk. This high-sensitivity rain detection module is designed for Arduino, ESP32, Raspberry Pi and DIY weather monitoring projects.

The sensor uses a conductive rain detection plate and an LM393 comparator control board to detect water droplets and surface moisture.

With both analog (AO) and digital (DO) outputs, the module is suitable for rain alarms, automated weather stations, smart irrigation systems, automatic window-closing projects and environmental monitoring.

Key Features

  • High-sensitivity rain and water droplet detection
  • LM393 comparator control circuit
  • 3.3V to 5V DC operating voltage
  • Analog and digital output signals
  • Adjustable digital detection threshold
  • Onboard sensitivity adjustment potentiometer
  • Large conductive sensing plate
  • Power and detection status indicator LEDs
  • Simple four-pin controller interface
  • Suitable for Arduino UNO, Nano and Mega
  • Compatible with ESP32 and other 3.3V microcontrollers when correctly powered
  • Useful for DIY weather and automation projects
  • Separate sensor plate and controller design
  • Easy installation in electronics projects

Technical Specifications

Specification Details
Product Name Rain Drops Detection Sensor Module
Common Module Type YL-83 / FC-37 Style
Comparator IC LM393
Detection Method Conductive Water Droplet Detection
Operating Voltage 3.3V–5V DC
Output Types Analog (AO) and Digital (DO)
Digital Output HIGH / LOW Threshold Signal
Typical Dry State DO HIGH
Typical Rain Detection State DO LOW After Threshold Is Crossed
Analog Output Voltage Varies with Surface Moisture
Threshold Adjustment Onboard Potentiometer
Controller Pins VCC, GND, AO, DO
Rain Plate Connection Two Conductive Connections
Typical Sensing Plate Size Approximately 50 × 40mm
Typical Controller Size Approximately 31 × 14mm
Indicator LEDs Power and Digital Detection Status
Microcontroller Compatibility Arduino, ESP32, ESP8266, Raspberry Pi with Suitable Interface
Applications Weather Monitoring, Rain Alarms, Smart Irrigation and Automation

Note: Specifications reflect common YL-83/FC-37-style rain modules. Confirm the supplied board's controller IC, dimensions and pin labels before publishing model-specific claims.

Applications

  • Arduino rain detection projects
  • Automatic rain alarms
  • Smart weather monitoring stations
  • Rain-triggered window closing systems
  • Smart irrigation controllers
  • Greenhouse automation
  • ESP32 IoT rain monitoring
  • Water droplet detection experiments
  • Automatic windshield wiper prototypes
  • Home automation systems
  • Educational environmental electronics

How Does the Rain Drops Sensor Work?

The rain detection plate contains two sets of conductive tracks separated by narrow gaps.

When the plate is dry, electrical resistance between the tracks is high.

When water droplets bridge the tracks, resistance decreases. This produces a change in the analog signal from the sensor circuit.

The LM393 comparator compares the sensor voltage with a threshold set using the onboard potentiometer.

When the selected threshold is crossed, the digital output changes state. On common modules, the output changes from HIGH to LOW when sufficient moisture is detected.

Analog and Digital Outputs

Analog Output (AO): Provides a changing voltage associated with the electrical conductivity of moisture on the sensing plate.

Digital Output (DO): Provides a threshold-based HIGH or LOW signal for applications requiring simple rain detection.

The analog output may be used to monitor relative wetness, but it is not a calibrated measurement of rainfall in millimeters or liquid depth.

Rain Sensor Module Pinout

Pin Function
VCC 3.3V–5V DC Power Supply
GND Ground Connection
AO Analog Moisture-Dependent Output
DO Digital Rain Detection Output

Arduino UNO Connection Guide

Rain Sensor Arduino UNO
VCC 5V
GND GND
AO A0
DO D2

Connect the separate rain plate to the two-pin input connector on the LM393 controller board.

Arduino software can read the analog value using analogRead() and monitor the digital threshold output using digitalRead().

Adjustable Rain Detection Sensitivity

The onboard potentiometer adjusts the comparator threshold for digital rain detection.

To configure the threshold:

  1. Connect the module to a suitable power source.
  2. Keep the sensing plate dry and observe the digital output.
  3. Place a few drops of water on the plate.
  4. Carefully rotate the potentiometer.
  5. Adjust until the digital output changes at the desired wetness level.
  6. Repeat the test to confirm reliable switching.

The potentiometer changes the digital detection threshold, not the analog sensor's physical sensitivity.

ESP32 Compatibility

The module can be connected to an ESP32 using suitable GPIO and ADC connections.

For ESP32 projects, powering a compatible rain sensor module from 3.3V helps keep its output signals within the ESP32's permitted input range.

Check the actual board's pull-up circuits before connecting it to a 3.3V-only controller.

Raspberry Pi Compatibility

The digital output can be connected to a suitable Raspberry Pi GPIO input when its voltage levels are compatible with 3.3V logic.

Reading the analog output on a standard Raspberry Pi requires an external analog-to-digital converter, such as an MCP3008 or ADS1115.

Do not connect 5V output signals directly to Raspberry Pi GPIO pins.

Rain Detection vs Water Level Measurement

This module primarily detects rain droplets and changes in surface moisture.

It does not directly measure water depth in a tank or provide a calibrated rainfall amount.

For tank level detection, a suitable float switch, ultrasonic distance sensor or dedicated liquid-level sensor may be more appropriate.

Installation and Maintenance

  • Position the sensing plate where rain droplets can reach it.
  • Mount the plate at a slight angle to allow water to drain.
  • Keep the LM393 controller PCB protected from rain and direct water exposure.
  • Clean and dry the sensing plate periodically.
  • Reduce continuous electrical excitation of the plate where practical to limit corrosion.
  • Use appropriate weatherproof cable routing for outdoor installations.
  • Test the module periodically to detect contamination or oxidized traces.

Important Safety and Usage Notes

  • Use only a compatible low-voltage DC power supply.
  • Do not connect the module directly to AC mains.
  • Keep controller electronics dry.
  • Do not exceed microcontroller input-voltage ratings.
  • Use a suitable relay driver or motor controller for pumps, motors and automatic window mechanisms.
  • Do not drive high-current loads directly from the sensor output.
  • The sensing plate may corrode during extended wet operation.
  • Readings depend on water conductivity, contamination and moisture coverage.
  • The analog output is not a calibrated rainfall measurement.
  • The module is not a certified meteorological rain gauge.

Package Contents

  • 1 × Rain Detection Sensing Plate
  • 1 × LM393 Comparator Control Board
  • 1 × Connecting Cable, If Included with Supplied Kit

Buy Rain Drops Detection Sensor in Pakistan

Looking for a Rain Drops Detection Sensor Module for Arduino in Pakistan? Shop online at Robostan.pk for weather monitoring sensors, Arduino modules, ESP32 development boards, water detection sensors and electronics components.

Suitable for students, electronics enthusiasts, engineers and developers creating rain alarms, smart irrigation systems and DIY weather station projects.

Order your Rain Sensor Module from Robostan.pk with nationwide delivery across Pakistan.

Robostan.pk – Build. Innovate. Create.

Rs.150.00

Pickup available at Robostan

Usually ready in 24 hours

View store information

Rain Drops Detection Sensor Module – LM393 Analog & Digital Rain Sensor for Arduino

Robostan

Pickup available, usually ready in 24 hours

Shop No.6 Ground Floor, Al-Khalil Center, Hall Rd, Garhi Shahu, Lahore, 54700
Lahore 54700
Pakistan

+923324249540

Rain Drops Detection Sensor Module for Arduino – LM393 Rain & Water Detection

Buy the Rain Drops Detection Sensor Module online in Pakistan from Robostan.pk. This high-sensitivity rain detection module is designed for Arduino, ESP32, Raspberry Pi and DIY weather monitoring projects.

The sensor uses a conductive rain detection plate and an LM393 comparator control board to detect water droplets and surface moisture.

With both analog (AO) and digital (DO) outputs, the module is suitable for rain alarms, automated weather stations, smart irrigation systems, automatic window-closing projects and environmental monitoring.

Key Features

  • High-sensitivity rain and water droplet detection
  • LM393 comparator control circuit
  • 3.3V to 5V DC operating voltage
  • Analog and digital output signals
  • Adjustable digital detection threshold
  • Onboard sensitivity adjustment potentiometer
  • Large conductive sensing plate
  • Power and detection status indicator LEDs
  • Simple four-pin controller interface
  • Suitable for Arduino UNO, Nano and Mega
  • Compatible with ESP32 and other 3.3V microcontrollers when correctly powered
  • Useful for DIY weather and automation projects
  • Separate sensor plate and controller design
  • Easy installation in electronics projects

Technical Specifications

Specification Details
Product Name Rain Drops Detection Sensor Module
Common Module Type YL-83 / FC-37 Style
Comparator IC LM393
Detection Method Conductive Water Droplet Detection
Operating Voltage 3.3V–5V DC
Output Types Analog (AO) and Digital (DO)
Digital Output HIGH / LOW Threshold Signal
Typical Dry State DO HIGH
Typical Rain Detection State DO LOW After Threshold Is Crossed
Analog Output Voltage Varies with Surface Moisture
Threshold Adjustment Onboard Potentiometer
Controller Pins VCC, GND, AO, DO
Rain Plate Connection Two Conductive Connections
Typical Sensing Plate Size Approximately 50 × 40mm
Typical Controller Size Approximately 31 × 14mm
Indicator LEDs Power and Digital Detection Status
Microcontroller Compatibility Arduino, ESP32, ESP8266, Raspberry Pi with Suitable Interface
Applications Weather Monitoring, Rain Alarms, Smart Irrigation and Automation

Note: Specifications reflect common YL-83/FC-37-style rain modules. Confirm the supplied board's controller IC, dimensions and pin labels before publishing model-specific claims.

Applications

  • Arduino rain detection projects
  • Automatic rain alarms
  • Smart weather monitoring stations
  • Rain-triggered window closing systems
  • Smart irrigation controllers
  • Greenhouse automation
  • ESP32 IoT rain monitoring
  • Water droplet detection experiments
  • Automatic windshield wiper prototypes
  • Home automation systems
  • Educational environmental electronics

How Does the Rain Drops Sensor Work?

The rain detection plate contains two sets of conductive tracks separated by narrow gaps.

When the plate is dry, electrical resistance between the tracks is high.

When water droplets bridge the tracks, resistance decreases. This produces a change in the analog signal from the sensor circuit.

The LM393 comparator compares the sensor voltage with a threshold set using the onboard potentiometer.

When the selected threshold is crossed, the digital output changes state. On common modules, the output changes from HIGH to LOW when sufficient moisture is detected.

Analog and Digital Outputs

Analog Output (AO): Provides a changing voltage associated with the electrical conductivity of moisture on the sensing plate.

Digital Output (DO): Provides a threshold-based HIGH or LOW signal for applications requiring simple rain detection.

The analog output may be used to monitor relative wetness, but it is not a calibrated measurement of rainfall in millimeters or liquid depth.

Rain Sensor Module Pinout

Pin Function
VCC 3.3V–5V DC Power Supply
GND Ground Connection
AO Analog Moisture-Dependent Output
DO Digital Rain Detection Output

Arduino UNO Connection Guide

Rain Sensor Arduino UNO
VCC 5V
GND GND
AO A0
DO D2

Connect the separate rain plate to the two-pin input connector on the LM393 controller board.

Arduino software can read the analog value using analogRead() and monitor the digital threshold output using digitalRead().

Adjustable Rain Detection Sensitivity

The onboard potentiometer adjusts the comparator threshold for digital rain detection.

To configure the threshold:

  1. Connect the module to a suitable power source.
  2. Keep the sensing plate dry and observe the digital output.
  3. Place a few drops of water on the plate.
  4. Carefully rotate the potentiometer.
  5. Adjust until the digital output changes at the desired wetness level.
  6. Repeat the test to confirm reliable switching.

The potentiometer changes the digital detection threshold, not the analog sensor's physical sensitivity.

ESP32 Compatibility

The module can be connected to an ESP32 using suitable GPIO and ADC connections.

For ESP32 projects, powering a compatible rain sensor module from 3.3V helps keep its output signals within the ESP32's permitted input range.

Check the actual board's pull-up circuits before connecting it to a 3.3V-only controller.

Raspberry Pi Compatibility

The digital output can be connected to a suitable Raspberry Pi GPIO input when its voltage levels are compatible with 3.3V logic.

Reading the analog output on a standard Raspberry Pi requires an external analog-to-digital converter, such as an MCP3008 or ADS1115.

Do not connect 5V output signals directly to Raspberry Pi GPIO pins.

Rain Detection vs Water Level Measurement

This module primarily detects rain droplets and changes in surface moisture.

It does not directly measure water depth in a tank or provide a calibrated rainfall amount.

For tank level detection, a suitable float switch, ultrasonic distance sensor or dedicated liquid-level sensor may be more appropriate.

Installation and Maintenance

  • Position the sensing plate where rain droplets can reach it.
  • Mount the plate at a slight angle to allow water to drain.
  • Keep the LM393 controller PCB protected from rain and direct water exposure.
  • Clean and dry the sensing plate periodically.
  • Reduce continuous electrical excitation of the plate where practical to limit corrosion.
  • Use appropriate weatherproof cable routing for outdoor installations.
  • Test the module periodically to detect contamination or oxidized traces.

Important Safety and Usage Notes

  • Use only a compatible low-voltage DC power supply.
  • Do not connect the module directly to AC mains.
  • Keep controller electronics dry.
  • Do not exceed microcontroller input-voltage ratings.
  • Use a suitable relay driver or motor controller for pumps, motors and automatic window mechanisms.
  • Do not drive high-current loads directly from the sensor output.
  • The sensing plate may corrode during extended wet operation.
  • Readings depend on water conductivity, contamination and moisture coverage.
  • The analog output is not a calibrated rainfall measurement.
  • The module is not a certified meteorological rain gauge.

Package Contents

  • 1 × Rain Detection Sensing Plate
  • 1 × LM393 Comparator Control Board
  • 1 × Connecting Cable, If Included with Supplied Kit

Buy Rain Drops Detection Sensor in Pakistan

Looking for a Rain Drops Detection Sensor Module for Arduino in Pakistan? Shop online at Robostan.pk for weather monitoring sensors, Arduino modules, ESP32 development boards, water detection sensors and electronics components.

Suitable for students, electronics enthusiasts, engineers and developers creating rain alarms, smart irrigation systems and DIY weather station projects.

Order your Rain Sensor Module from Robostan.pk with nationwide delivery across Pakistan.

Robostan.pk – Build. Innovate. Create.

You may also like