XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter
Specification
- Input voltage range:5-36VDC
- Output voltage range:1.25-32VDC adjustable
- Output current: 0-5A
- Output power: 75W
- High efficiency up to 96%
- Built in thermal shutdown function
- Built in current limit function
- Built in output short protection function
- Input reverse polarity protection
₨350
CompareXL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter
The XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter based on LM2596 advocate current to 3.0A, but only to 1.8A.However, being introduced module adds a heatsink, using high-power devices.This module can easily reach 4A, 50W, add heat sink circumstances can reach 75W, has a high price!! 5A 75W XL4015 DC-DC Converter Adjustable Step-Down Module 4.0-38V to 1.25V-36V DIY Adjustable Power Supply XL4015 LED module step down The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring.
The XLM2014 module with a stable and accurate dc power supply.Then short-press the button on the right side to select which one you need to adjust (input or output). Long-pressing the button on the right side makes the module enter calibration mode. After releasing the button, the related LED will blink to indicate which voltage is now calibrating, and the numeric display will blink with the present value.
Short-press the button to change the present value.Short-press the button on the right side to increase the voltage by one unit. Short-press the button on the left side to reduce the voltage by one unit.
- Module highlights: 5A high power、high efficiency and low ripple with power indicator !!!
- Input voltage range：4～38VDC(Note:input voltage not exceeding 38V)
- Output voltage range：1.25-36VDC adjustable
- Output current: 0-5A, recommended for use in 4.5A.
- Output power: 75W
- Working temperature: -40~+85 degrees
- Operating frequency: 180KHz
- Efficiency:96%（max)
- Short circuit protection: yes(limit current 8A).
- Over temperature protection
- Input reverse polarity protection: None (if required, high current diode in series with the input).
- L x W x H = 54 * 23 * 18mm
Application:
The DC/DC buck module applications the input voltage is higher than the output voltage of the buck field, such as battery, power transformer, DIY adjustable regulated power supply, 24V Vehicle notebook power supply,industrial equipment buck.12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V,24V buck to 12V, 36V buck to 24V etc. By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of —-XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter can be also downloaded from the link
Package Included :
1PC*XL4015 DC-DC Step Down Adjustable Power Supply Module LED Lithium Charger 5A Max
1PC*heat sink
Based on 0 reviews
Be the first to review “XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter”
You must be logged in to post a review.
Related products
-
Modules/Motors
5v 8 Channel Relay Module Relay Board in Pakistan
Key Features of 5v 8 Channel Relay Module Relay Board in Pakistan:
- Multiple Control Channels: The primary advantage of the 8 Channel Relay Module is its ability to manage up to eight devices simultaneously, making it ideal for larger projects where multiple appliances need to be controlled.
- Electrical Isolation: The module provides electrical isolation between the Arduino and high-voltage circuits, ensuring user safety and protecting sensitive components from damage.
- Easy Integration: The design of the relay module allows for seamless integration with most Arduino boards. Clear labeling of pins and a simple connection process make it accessible for beginners.
- Indicator LEDs: Each relay is typically equipped with an LED that indicates its activation status, facilitating easier troubleshooting and monitoring during project development.
SKU: n/a -
Modules/Motors
RTC I2C DS1307 AT24C32 Real Time Clock Module in Pakistan
What is an RTC?
A real time clock is basically just like a watch – it runs on a battery and keeps time for you even when there is a power outage! Using an RTC, you can keep track of long timelines, even if you reprogram your microcontroller or disconnect it from USB or a power plug.
Most microcontrollers, including the Arduino, have a built-in timekeeper called millis() and there are also timers built into the chip that can keep track of longer time periods like minutes or days. So why would you want to have a separate RTC chip? Well, the biggest reason is that millis() only keeps track of time since the Arduino was last powered – . That means that when the power is turned on, the millisecond timer is set back to 0. The Arduino doesn’t know that it’s ‘Tuesday’ or ‘March 8th’, all it can tell is ‘It’s been 14,000 milliseconds since I was last turned on’.
SKU: n/a -
Modules/Motors
Bluetooth Module BLE-CC-2541
Features
- RF
- 2.4-GHz Bluetooth low energy Compliant and Proprietary RF System-on-Chip
- Supports 250-kbps, 500-kbps, 1-Mbps, 2-Mbps Data Rates
- Excellent Link Budget, Enabling Long-Range Applications Without External Front End
- Programmable Output Power up to 0 dBm
- Excellent Receiver Sensitivity (–94 dBm at 1 Mbps), Selectivity,
and Blocking Performance - Suitable for Systems Targeting Compliance With Worldwide Radio
Frequency Regulations: ETSI EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN-40 Package
- Pin-Compatible With CC2540 (When Not Using USB or I2C)
- Low Power
- Active-Mode RX Down to: 17.9 mA
- Active-Mode TX (0 dBm): 18.2 mA
- Power Mode 1 (4-µs Wake-Up): 270 µA
- Power Mode 2 (Sleep Timer On): 1 µA
- Power Mode 3 (External Interrupts): 0.5 µA
- Wide Supply-Voltage Range (2 V–3.6 V)
- TPS62730 Compatible Low Power in Active Mode
- RX Down to: 14.7 mA (3-V supply)
- TX (0 dBm): 14.3 mA (3-V supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
With Code Prefetch - In-System-Programmable Flash, 128- or 256-KB
- 8-KB RAM With Retention in All Power Modes
- Hardware Debug Support
- Extensive Baseband Automation, Including Auto-Acknowledgment
and Address Decoding - Retention of All Relevant Registers in All Power Modes
- High-Performance and Low-Power 8051 Microcontroller Core
- Peripherals
- Powerful Five-Channel DMA
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- IR Generation Circuitry
- 32-kHz Sleep Timer With Capture
- Accurate Digital RSSI Support
- Battery Monitor and Temperature Sensor
- 12-Bit ADC With Eight Channels and Configurable Resolution
- AES Security Coprocessor
- Two Powerful USARTs With Support for Several Serial Protocols
- 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA) - I2C interface
- 2 I/O Pins Have LED Driving Capabilities
- Watchdog Timer
- Integrated High-PerformanceComparator
- Development Tools
- CC2541 Evaluation Module Kit (CC2541EMK)
- CC2541 Mini Development Kit (CC2541DK-MINI)
- SmartRF™ Software
- IAR Embedded Workbench™ Available
SKU: n/a - RF
There are no reviews yet.