Sensor
Lm35 water proof
Features:
- Directly Celsius temperature calibration;
- Linear :+ 10.0mV / ā;
- Ensure the accuracyĀ : 0.5 ā (at + 25 ā when);
- Temperature rangeĀ : 0 ā ~ 100 ā
- Direct output voltage signal;
- Internally precision fine-tuning;
- Wide supply voltage :4 ~ 30V;
- Operating current:Less than 60Ī¼A;
- Low self-heating, in still air 0.1 ā;
- Only non-linear value Ā± 1/4 ā of;
- Low-impedance output, 0.1Ī© at 1mA load
₨300
CompareDescription
This sealed analogĀ temperature probe lets you precisely measure temperatures in wet environments.Ā The LM35 are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature.
Dimensions:Ā Probe is 6mm in diameter and roughly 30mm long. Overall length (including wire) is 6 feet.
Based on 0 reviews
Be the first to review “Lm35 water proof”
You must be logged in to post a review.
Related products
-
Sensor
Ds18b20
Key Features
- Unique 1-WireĀ®Ā Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55Ā°C to +125Ā°C (-67Ā°F to +257Ā°F)
- Ā±0.5Ā°C Accuracy from -10Ā°C to +85Ā°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-Bit Serial Code Stored in On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
- Available in 8-Pin SO (150 mils), 8-Pin ĀµSOP, and 3-Pin TO-92 Packages
SKU: n/a -
Sensor
Mq 135
Specifications ofĀ MQ-135 gas sensor
- Wide detecting scope
- Fast response and High sensitivity
- Stable and long life Simple drive circuit
- Used in air quality control equipment for buildings/offices, is suitable for detecting
of NH3, NOx, alcohol, Benzene, smoke, CO2, etc. - Size: 35mm x 22mm x 23mm (length x width x height)
- Working voltage: DC 5 V
- Signal output instruction.
- Dual signal output (analog output, and high/low digital output)
- 0 ~ 4.2V analog output voltage, the higher the concentration the higher the voltage.
SKU: n/a -
Sensor
Mq 7
Features
- Sensitive for carbon monoxide
- Output voltage boosts along with the concentration of the measured gases increases
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
Specifications
- Power: 2.5V ~ 5.0V
- Dimension: 40.0mm * 21.0mm
- Mounting holes size: 2.0mm
SKU: n/a
There are no reviews yet.