ADC0800 Analog to Digital Converter
Out of stock
Features
- Low cost
- +5V, 10V input ranges
- No missing codes
- Ratiometric conversion
- TRI-STATE outputs
- Fast TC 50 ms
- Contains output latches
- TTL compatible
- Supply voltages 5V DC and b12V DC
- Resolution 8 bits
- Linearity +1 LSB
- Conversion speed 40 clock periods
- Clock range
₨100
Out of stock
CompareProduct Description
The ADC0800 is an 8-bit monolithic A/D converter using Pchannel ion-implanted MOS technology. It contains a high input impedance comparator, 256 series resistors and analog switches, control logic and output latches. Conversion is performed using a successive approximation technique where the unknown analog voltage is compared to the resistor tie points using analog switches. When the appropriate tie point voltage matches the unknown voltage, conversion is complete and the digital outputs contain an 8-bit complementary binary word corresponding to the unknown. The binary output is TRI-STATEÉ to permit bussing on common data lines. The ADC0800PD is specified over b55§C to a125§C and the ADC0800PCD is specified over 0§C to 70§C.
Based on 0 reviews
Be the first to review “ADC0800 Analog to Digital Converter”
You must be logged in to post a review.
Related products
-
Analog/Digital Converters
ADC0831 Analog to Digital Converter
Features
- NSC MICROWIRE compatible — direct interface to COPS family processors
- Easy interface to all microprocessors, or operates “stand-alone”
- Operates ratiometrically or with 5 VDC voltage reference
- No zero or full-scale adjust required
- 2-, 4- or 8-channel multiplexer options with address logic
- Shunt regulator allows operation with high voltage supplies
- 0V to 5V input range with single 5V power supply
- Remote operation with serial digital data link
- TTL/MOS input/output compatible n 0.3″ standard width, 8-, 14- or 20-pin DIP package
- 20 Pin Molded Chip Carrier Package (ADC0838 only)
- Surface-Mount Package
Key Specifications
- Resolution 8 Bits
- Total Unadjusted Error ±1⁄2 LSB and ±1 LSB
- Single Supply 5V DC
- Low Power 15 mW
- Conversion Time
SKU: n/a -
Analog/Digital Converters, Tools & Kits
LTC1871 DC-DC 3.5-30V 6A 100W Adjustable High Power Boost Power Module Step Up Board Converter 2 Way Display LED Voltmeter
Analog/Digital Converters, Tools & KitsLTC1871 DC-DC 3.5-30V 6A 100W Adjustable High Power Boost Power Module Step Up Board Converter 2 Way Display LED Voltmeter
Input voltage range: 3.5V-30V(Note: 30V is the maximum voltage, when use please make sure input lower than 30V, otherwise will burn out.)
Output voltage range: 3.5V-30V (boost mode, the input must be less than or equal to the output voltage)
Maximum input current: 10A (peak current)
Continuous Current: 6A
Size: 67cm(L) * 42cm(W) * 18cm(H)
Output power: Max 100W {Note: according to the law of conservation of power, computation under the condition of rated output current: Uin*Iin*efficiency =Uout*Iout(Uin:input voltage, Iin:input current)}
Weight: 35g
Color: Red
Voltmeter Accuracy: ± (5 ‰ + 1 digit)
Static power consumption:Typical about 15mA(With the input voltage, output voltage and the color is closely related to the digital pipe. The actual current there is a deviation)
IN +: Positive Input, IN-: Negative Input. OUT +: Positive output, OUT-: Negative output.SKU: n/a -
Analog/Digital Converters, Tools & Kits
USB Detector Current Voltage 3V-9V Tester Double USB Row Shows
Analog/Digital Converters, Tools & KitsUSB Detector Current Voltage 3V-9V Tester Double USB Row Shows
USB Current Voltage Tester
Condition: New
Measuring range: DC 3v – 9v, current: 0-3a (error: ± 1%), 5a biggest support
5a current (if more than 3a, error will be larger than 3%)
Color is shown as picturesSKU: n/a
There are no reviews yet.