Zigbee Module (S1 / S2)

Zigbee Module (S1 / S2)

The Zigbee Module (S1 / S2) is very popular ISM 2.4GHz XBee modules from Digi . These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set.
S1 series modules work on  802.15.4 protocol & S2 series work on ZIGBEE protocol.You cannot mix S1 with S2.

XBee modules can give communication range of 30 meters indoor or 100 meters outdoor. This module is ideal for  PC to Robot communication or  MCU to control other devices wirelessly.
This ZigBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 115kbps. It has indoor range of 30 meters and outdoor RF line-of-sight range of up to 100 meters. By liking Our Facebook Page Embeded Studio , you can get special discount. Different names  of zigbee module are Zigbee Module (S1 / S2) , rf line of sight range , outdoor rf line of sight , line of sight range , rf line of sight , range of 30 meters

Features & Specifications:

Indoor Range up to 100 ft. (30 m) & Outdoor RF line-of-sight Range up to 300 ft. (100 m)
Interface: Serial(UART) at 1200-115200 bps
Supply Voltage: 2.8 – 3.4 V
Transmit Current (typical) 45mA (@ 3.3 V)
Idle / Receive Current (typical) 50mA (@ 3.3 V)
Operating Frequency: ISM 2.4 GHz
Antenna: Whip antenna

• Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
  
• Number of Channels: (software selectable) 16 Direct Sequence Channels
  
• Addressing Options: PAN ID, Channel and Addresses
  
• ADC and I/O line support
  
• AT and API Command Modes for configuring module parameters
  
• Extensive command set
  
• Small form factor