USB to rs232 Serial Cable
USB to RS-232 Adapter (35cm)
₨300
CompareUSB to rs232 Serial Cable
The ICUSB232V2 1 Port USB to Serial Adapter converts a USB port into an RS232 DB9 serial port to connect to, monitor, and control a serial device.Ā USB to rs232 Serial CableĀ Supporting data transfer rates up to 921.6 Kbps, the USB to serial cable is a convenient and cost-saving solution for providing serial connectivity to devices such as point-of-sale terminals, serial modems, industrial equipment, and a wide variety of other RS232 peripherals.
The USB to RS232 converter is easy to install and offers broad operating system compatibility, including WindowsĀ® 8, Linux and Mac OSĀ®, for easy integration into mixed environments. By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of USB to rs232 Serial Cable can be also downloaded from the link.
The Advantages
- Install in almost any laptop or desktop computer through broad operating system compatibility, including WindowsĀ® 8
- Communicate efficiently with connected devices with high-speed 921Kbps support
- Portable and lightweight, the USB-Powered design requires no additional power adapter
- Allows any PC to connect serial devices and programs that communicate through COM ports
- 24-inch cable with standard USB Type A Male to standard 9-pin DB9 RS-232 serial connector
- PL-2303 Chipset for widest possible compatibility with Windows (10/8.1/8/7XP), Mac, Linux, and other platforms
- Programmable baud rate from 75 bits per second to 128000 bits per second. Plug and play creation of a COM port. Powered by USB – no external power needed
- We love our Plugable products and hope you will too. All of our products are backed with a 1-year limited parts and labor warranty and Seattle-based email support.
Based on 0 reviews
Be the first to review “USB to rs232 Serial Cable”
You must be logged in to post a review.
Related products
-
Cables
USB to TTL Serial Cable
Description
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36″ cable are four wire – red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
SKU: n/a -
Modules/Motors, Project Boards
Logic Analyzer EEPROM CY7C68013A-56 EZ-USB FX2LP USB2.0 Develop Board Module
Modules/Motors, Project BoardsLogic Analyzer EEPROM CY7C68013A-56 EZ-USB FX2LP USB2.0 Develop Board Module
1. Adopt cy7c68013a-56 chip: low-power version, enhanced 51 core, 16KB program data area, 48Mhz main frequency, 480Mbps high-speed transmission protocol standard, which is in conformity with USB2.0 specification and downward compatible with USB1.1.
2. Firmware EEPROM: the complete system programming scheme is used to download firmware programs directly using USB cable. The board provides 16K (24LC128) large-capacity program memory (EEPROM), which is used to store VID/PID and USB firmware, meeting the program space requirements of CY7C68013A.
3. All GPIO are introduced through 2.54mm standard needle discharge, which is greatly convenient for learners to extend the design by themselves.
4. With the corresponding firmware, the functions of the logic analyzer can be realized through the core board.
5. Provide schematic diagram in PDF format and relevant source code.SKU: n/a
There are no reviews yet.