MAX488 IC Price in Pakistan
Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
₨70
CompareProduct Description
The MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487 are low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, thus allowing error-free data transmission up to 250kbps. The driver slew rates of the MAX481, MAX485, MAX490, MAX491, and MAX1487 are not limited, allowing them to transmit up to 2.5Mbps.
Based on 0 reviews
Be the first to review “MAX488 IC Price in Pakistan”
You must be logged in to post a review.
Related products
-
Analog/Digital Converters
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
ADC Bit rate: 16 Bit
Interface Type: I2C
Channels: 4 Channels AN0 AN1 AN2 AN3 or 2 differential inputs
Input voltage: 2.0~5.5V
Channel input voltage :0-VDD
Continuous Mode: Only 150uA
Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE:8sps-860sps
Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,-2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V
I2C 7-bit addresses between 0x48-0x4B
Size:18mm*28mm
Applications
Portable instrumentation
Consumer goods
Battery monitoring
Temperature measurement
Factory automation and process controlsSKU: n/a -
Analog/Digital Converters
Max 232
Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: n/a - RS-232 Bus-Terminal ESD Protection Exceeds
-
Analog/Digital Converters
DAC0831 Digital to Analog Converter
Features 
Double Buffered, Single Buffered or Flow- Through Digital Data InputsEasy Interchange and Pin-Compatible with 12-bit DAC1230 SeriesDirectly Interfaces to all Popular MicroprocessorsLinearity Specified with Zero and Full Scale AdjustWorks with ±10V Reference Full 4-Quadrant MultiplicationCan be Used in the Voltage Switching ModeLogic Inputs are TTL CompatibleSKU: n/a -
Analog/Digital Converters
MCP602 IC Price in Pakistan
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP602 uses Microchip’s advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP602 operates with a single supply voltage that can be as low as 2.7V, while drawing less than 325 of quiescent current per amplifier. The MCP602 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
SKU: n/a
Double Buffered, Single Buffered or Flow- Through Digital Data Inputs
There are no reviews yet.