Zigbee Breakout Board
This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1″ standard spacing dual row header. The spacing between 0.1″ headers is 0.5″ making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (you’ll need 2!) and 0.1″ headers below.
₨700
CompareZigbee Breakout Board
- Antennas and power supply
- 6 months of free cellular service*
- 1 LTE Cat 1 SIM for Verizon
- 1 XBee Development Board
- XBee Cellular LTE Cat 1 embedded modem
Zigbee is excited to bring together the power and flexibility of the XBee ecosystem with Verizon, the world’s largest cellular network. This powerful combination enables OEMs to quickly integrate cutting edge 4G cellular technology into their devices and applications without dealing with the painful, time-consuming, expensive FCC and carrier end-device certifications. A bundled data plan will be available as an option, with the modem ‘shipping hot’, fully pre-provisioned and ready to communicate over the cellular network right out of the box.
A suite of development tools make integrating the Digi XBee Cellular fast and simple. The free XCTU utility is ideal for quick configuration of the modem, and Digi XBee libraries for Java and C can be used to accelerate code development for external microcontrollers.
By liking Our Facebook Page Embeded Studio , you can get special discount
Benefits
- 6 months of free cellular service*
- Industry’s fastest path to embedded cellular connectivity
- Smallest end-device certified embedded cellular modem on the market
- Pre-certified, Verizon end-device certified, and pre-provisioned on the cellular network
- Authentic 20-pin XBee Through-Hole form factor
- Standard XBee AT and API interfaces
- 3.3 V power for battery-powered applications
- OTA firmware updates
- SSL/TLS for secure communications
- Configure locally with XCTU or remotely with Digi Remote Manager
Based on 0 reviews
Be the first to review “Zigbee Breakout Board”
You must be logged in to post a review.
Related products
-
Zigbee Boards
ZigBee Dongle
Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10° to 50°C
- Dimension: 89 x 27.8 x 12.7 mm
SKU: n/a -
Breakout Boards
Tb6560 3A Single-Axis CNC Router Stepper Motor Driver Board
Feature:
- Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
- For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
SKU: n/a -
Zigbee Boards
Zigbee Shield For Arduino
Features
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- Reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
SKU: n/a -
Zigbee Boards
Zigbee Module (S1 / S2)
Features
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
There are no reviews yet.