Servo Tester CCPM 3 Mode ESC Servo Motor Tester
Specification:
-Type: CCPM Servo Tester, ESC or Servo tester
-Output: ≤15mA (5.0)
-Voltage Consumption: DC4.8-6V
-Output Signal: 1.5ms ± 0.5ms
-Size: 48 x 42 x 17mm / 1.89 ” x 1.65 x 0.67 ” (Approx.)
-Coror: Blue
₨300
CompareBased on 0 reviews
Be the first to review “Servo Tester CCPM 3 Mode ESC Servo Motor Tester”
You must be logged in to post a review.
Related products
-
Modules/Motors, Tools & Kits
DSO138 DIY Digital Oscilloscope Kit
Maximum real-time sampling rate: 1Msps
● Accuracy: 12Bit
● Sampling buffer depth: 1024 bytes
● Analog bandwidth: 0 – 200KHz
● Vertical sensitivity: 10mV / Div – 5V / Div (1 – 2 – 5 progressive manner)adjustable vertical displacement with instructions
● Input impedance: 1M Ohm
● Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
● Coupling modes: DC / AC / GND
● The horizontal time base range: 10 microseconds / Div – 50s / Div (1 – 2 – 5 progressive manner)
● 1Hz / 3.3V square wave test signal sourceSKU: n/a -
Tools & Kits
UTD2102cex
Product Features
1. 100MHz bandwidth, 1GSa/s real-time sampling rate
2. 2 channels
3. 25kpts memory depth
4. 20,000wfms/s waveform acquisition rate
5. 2ns/div~50s/div time-base
6. Trigger modes: Edge, Pulse Width, Runt, Over-amplitude, Slope and Video
7. Calibration Signal Output: 10Hz, 100Hz, 1kHz (default), 10kHz and 100kHz
8. Input calibration signal only by pressing a button
9. 10Mpts waveform recording
10. 8-inch TFT LCD, WVGA (800×480)
11. USB OTG and Pass/Fail interfaces
SKU: n/a -
Analog/Digital Converters, Tools & Kits
USB Detector Current Voltage 3V-9V Tester Double USB Row Shows
Analog/Digital Converters, Tools & KitsUSB Detector Current Voltage 3V-9V Tester Double USB Row Shows
USB Current Voltage Tester
Condition: New
Measuring range: DC 3v – 9v, current: 0-3a (error: ± 1%), 5a biggest support
5a current (if more than 3a, error will be larger than 3%)
Color is shown as picturesSKU: n/a
There are no reviews yet.