Serial Mp3 Module Sensor

Serial Mp3 Module Sensor

The serial mp3 module sensor is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip—YX5300. It can support 8k Hz~ 48k Hz sampling frequency MP3 and WAV file formats. There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending commands to the module via UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible with Arduino/AVR/ARM/PIC. By liking Our Facebook Page Embeded Studio , you can get special discount. Data Sheet of Serial Mp3 Module Sensor can also be downloaded from the link. Available on a good price.

Features:

• Support sampling frequency (kHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
• Support file format: MP3 / WAV
• Support Micro SD card, Micro SDHC Card
• 30 class adjustable volume
• UART TTL serial control playback mode, baud rate is 9600bps
• Power supply can be 3.2 ~ 5.2VDC

Interface

Control interface: It is UART TTL interface. A total of four pins (GND, VCC, TX, RX), GND to ground, VCC is the power supply, TX is the TX pin of the MP3 chip, RX is the RX pin of the MP3 chip.

TF card socket: The micro sd card can be plugged in it.

Playbck indicator: Green light. If it is ready to play or it is paused, it keeps lighting. If playing, it blinks. Headphone jack: It can be connected with the headphone or external amplifier.

Mounting holes: 4 screw mounting holes whose diameter is 2.2mm, so that the module is easy to install, easy to combine with other