MAX 6675
Key Features
- Cold-Junction Compensation
- Simple SPI-Compatible Serial Interface
- 12-Bit, 0.25°C Resolution
- Open Thermocouple Detection
₨350
CompareProduct Description
MAXIM IC MAX6675 Cold Junction Compensated K-Type Thermocouple to Digital Converter. This simple 8-pin SOIC IC attaches directly to any K-Type Thermocouple and interfaces via a SPI read-only interface.
Works great with 8-pin SOIC to DIP adapters.
- 0.25C Resolution
- 0C to +1024C
- Minimal 2-wire digital interface
Based on 0 reviews
Be the first to review “MAX 6675”
You must be logged in to post a review.
Related products
-
Analog/Digital Converters
DC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Analog/Digital ConvertersDC 4.5-40V To 5V 2A USB Charger DC-DC Step-down Buck Converter Voltmeter Module
Input voltage: DC 4.5 ~ 40V. Output voltage: 5V (when the input voltage is between 6.5V ~ 40V). Output current: 2A. The voltmeter has automatic calibration function. With reverse connection protection. With overheat protection and short circuit protection. With USB power indicator light. High efficiency and low ripple. Application: can be used on car, electric bike, motorcycle for voltage measurement and to charge phone, iPad, Mp3 etc.
SKU: n/a -
Analog/Digital Converters
MAX487 IC Price in Pakistan
Key Features
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance
SKU: n/a - Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
-
Analog/Digital Converters
ADC0800 Analog to Digital Converter
Features
- Low cost
- +5V, 10V input ranges
- No missing codes
- Ratiometric conversion
- TRI-STATE outputs
- Fast TC 50 ms
- Contains output latches
- TTL compatible
- Supply voltages 5V DC and b12V DC
- Resolution 8 bits
- Linearity +1 LSB
- Conversion speed 40 clock periods
- Clock range
SKU: n/a -
Analog/Digital Converters
Max 232
Features
- RS-232 Bus-Terminal ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM) - Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU V.28 Standards
- Operates With 3-V to 5.5-V VCC Supply
- Operates up to 250 kbit/s
- Two Drivers and Two Receivers
- Low Supply Current: 300 µA Typical
- External Capacitors: 4 × 0.1 µF
- Accepts 5-V Logic Input With 3.3-V Supply
- Alternative High-Speed Terminal-Compatible Devices (1 Mbit/s)
- SN65C3232 (–40°C to 85°C)
- SN75C3232 (0°C to 70°C)
SKU: n/a - RS-232 Bus-Terminal ESD Protection Exceeds
-
Analog/Digital Converters
ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier
ADC Bit rate: 16 Bit
Interface Type: I2C
Channels: 4 Channels AN0 AN1 AN2 AN3 or 2 differential inputs
Input voltage: 2.0~5.5V
Channel input voltage :0-VDD
Continuous Mode: Only 150uA
Single-Shot Mode: Auto Shut-Down
PROGRAMMABLE DATA RATE:8sps-860sps
Input range programmed control, 7 types input ranges: -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,-2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V
I2C 7-bit addresses between 0x48-0x4B
Size:18mm*28mm
Applications
Portable instrumentation
Consumer goods
Battery monitoring
Temperature measurement
Factory automation and process controlsSKU: n/a
There are no reviews yet.