Based on 0 reviews
Be the first to review “65 watt Mega Safe 2 Adapter”
You must be logged in to post a review.
Related products
-
Cables
Jumper Wires Male to Male
Features
- Male to Male AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping
- 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires
- Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length
- PVC Insulated Wire Casing with 2.54 mm Pitch DuPont Connectors
- For Use In Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more
SKU: n/a -
Cables
Jumper Wires Male to Female
Features
- Each cable length about 20cm or 8-inch
- The male ends meant for insertion into standard 0.1 inch (2.54mm) female sockets and the female ends are meant for insertion onto standard 0.1 inch (2.54mm) male headers
- The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers
SKU: n/a -
Cables
USB to TTL Serial Cable
Description
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36″ cable are four wire – red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
SKU: n/a
There are no reviews yet.