Zigbee
Showing all 4 results
-
Zigbee Boards
Zigbee Breakout Board
This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1″ standard spacing dual row header. The spacing between 0.1″ headers is 0.5″ making it breadboard DIP friendly. We highly recommend using the female sockets to avoid having to solder the XBee permanently to the breakout board. This is the PCB only. Please order the accompanying 2mm sockets (youāll need 2!) and 0.1″ headers below.
SKU: n/a -
Zigbee Boards
ZigBee Dongle
Features & Specifications
- Texas Instrument CC2530 SoC
- USB 2.0
- FTDI Virtual COM Port
- ZigBee Profile: Home Automation 1.2
- OTA Programming
- LED Indicator
- Frequencies: 2.4GHz
- Output Power: 17 dBm
- RX Sensitivity: -101 dBm
- Data Rate: 250 kbit/s
- Range: 200 meters (outdoor)
- Operating Humidity: up to 90% non-condensing
- Operating Temperature: -10Ā° to 50Ā°C
- Dimension: 89 x 27.8 x 12.7 mm
SKU: n/a -
Zigbee Boards
Zigbee Module (S1 / S2)
Features
- Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
- Number of Channels: (software selectable) 16 Direct Sequence Channels
- Addressing Options: PAN ID, Channel and Addresses
- ADC and I/O line support
- AT and API Command Modes for configuring module parameters
- Extensive command set
- Small form factor
SKU: n/a - Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
-
Zigbee Boards
Zigbee Shield For Arduino
Features
- Mounts directly onto your Arduino
- DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
- 3.3V power regulation and MOSFET level shifting on-board
- 9×11 grid of 0.1″ spaced prototyping holes
- Reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
SKU: n/a
