Special Offer
XGecu Pro T48 Universal Programmer Price in Pakistan
₨11,750-
Raspberry Pi
Camera with Flash for Raspberry Pi
Features
The LISIPAROI can be powered by the Raspberry Pi or by an external power supply.
Brightness can be controlled digitally by PWM or analogue by varying the voltage between 0 and 3v.
- White or Infrared LEDs
- Flash or Steady Light
- Powered by Pi or separate battery pack
- Attaches to existing camera module
- Brightness control
- Additional mounting points
- Perfect for security or timelapse photography
SKU: n/a
-
Analog/Digital Converters
MCP 602
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP602 uses Microchip’s advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP602 operates with a single supply voltage that can be as low as 2.7V, while drawing less than 325 of quiescent current per amplifier. The MCP602 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
SKU: n/a -
Micro Controllers
PIC18F4520-I/P 8-BIT PIC Microcontroller Price in Pakistan
In terms of connectivity, the PIC18F4520 supports various communication protocols, making it suitable for interfacing with other devices and systems. Its robust set of I/O pins provides flexibility for connecting to sensors, displays, and other components. This microcontroller is commonly used in applications such as industrial control systems, home automation, robotics, and more. The PIC18F4520’s development ecosystem is well-established, with a variety of development tools, compilers, and libraries available to aid programmers. This makes it accessible to both beginners and experienced developers.
SKU: n/a
-
Micro Controllers
ATML – AVR AT Tiny 2313
Special Microcontroller Features
- – debugWIRE On-chip Debugging
- – In-System Programmable via SPI Port
- – External and Internal Interrupt Sources
- – Low-power Idle, Power-down, and Standby Modes
- – Enhanced Power-on Reset Circuit
- – Programmable Brown-out Detection Circuit
- – Internal Calibrated Oscillator
SKU: n/a -
Sensor
DHT 21
Feature & Application:
– Full range temperature compensated
– Relative humidity and temperature measurement
– Calibrated digital signal
– Outstanding long-term stability
– Extra components not needed
– Long transmission distance
– Low power consumption
– 4 pins packaged and fully interchangeable
SKU: n/a -
Modules/Motors
Ltc3588
Features
- 950nA Input Quiescent Current (Output in Regulation – No Load)
- 450nA Input Quiescent Current in UVLO
- 2.7V to 20V Input Operating Range
- Integrated Low-Loss Full-Wave Bridge Rectifier
- Up to 100mA of Output Current
- Selectable Output Voltages of 1.8V, 2.5V, 3.3V, 3.6V
- High Efficiency Integrated Hysteretic Buck DC/DC
- Input Protective Shunt – Up to 25mA Pull-Down at VIN ≥ 20V
- Wide Input Undervoltage Lockout (UVLO) Range
- Available in 10-Lead MSE and 3mm × 3mm DFN Packages
SKU: n/a -
Sensor
Mq 7
Features
- Sensitive for carbon monoxide
- Output voltage boosts along with the concentration of the measured gases increases
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
Specifications
- Power: 2.5V ~ 5.0V
- Dimension: 40.0mm * 21.0mm
- Mounting holes size: 2.0mm
SKU: n/a -
Cables
USB to TTL Serial Cable
Description
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36″ cable are four wire – red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
SKU: n/a -
Arduino, Sensor
10KG Scale Load Cell Weight Weighing Sensor +HX711 Weighing Sensors AD Module
The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128. The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module.
SKU: n/a
Products Grid
Best Sellers
Recently Added
MCP 602
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 uA and an offset voltage that is less than 2 mV. The MCP602 uses Microchip’s advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing. The MCP602 operates with a single supply voltage that can be as low as 2.7V, while drawing less than 325 of quiescent current per amplifier. The MCP602 is available in standard 8-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
MAX 488
Key Features
Max 487
Key Features
Max 485
Key Features
Max 232
Features
±15 kV Using Human-Body Model (HBM)
PIC18F4520-I/P 8-BIT PIC Microcontroller Price in Pakistan
In terms of connectivity, the PIC18F4520 supports various communication protocols, making it suitable for interfacing with other devices and systems. Its robust set of I/O pins provides flexibility for connecting to sensors, displays, and other components. This microcontroller is commonly used in applications such as industrial control systems, home automation, robotics, and more. The PIC18F4520’s development ecosystem is well-established, with a variety of development tools, compilers, and libraries available to aid programmers. This makes it accessible to both beginners and experienced developers.
PIC 16F72 Refurbished
MEMORY ORGANIZATION
There are two memory blocks in the PIC16F72 device. These are the program memory and the data memory. Each block has separate buses so that concurrent access can occur. Program memory and data memory are explained in this section. Program memory can be read internally by the user code (see Section 7.0). The data memory can further be broken down into the general purpose RAM and the Special Function Registers (SFRs). The operation of the SFRs that control the “core” are described here. The SFRs used to control the peripheral modules are described in the section discussing each individual peripheral module. Additional information on device memory may be found in the PIC™ Mid-Range Reference Manual, (DS33023).
PIC 16F628
Product Development
The PIC16F627A/628A/648A family is supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a low cost in-circuit debugger, a low cost development programmer and a full-featured programmer. A Third Party “C” compiler support tool is also available.